Aufrufe
vor 3 Jahren

ATH-Heinl Bedienungsanleitung Single Lift 35M

  • Text
  • Montage
  • Zustand
  • Maschine
  • Schraube
  • Produkthersteller
  • Druckfehler
  • Rechte
  • Urheberrecht
  • Technische
  • Vorbehalten
ATH-Heinl Bedienungsanleitung Single Lift 35M

3.3 Operation a.

3.3 Operation a. Lift The lift truck or support arm must be in the lowest position. The arms must be turned parallel to the direction of travel. Now the the platform can be pushed under the vehicle. The arms are then aligned according to the vehicle manufacturer's specifications. To do this, the arms with the rubber supports can be pulled out, pushed in and turned. Press the "LIFT" button to start the lifting platform and bring the supports closer to the vehicle. Before lifting the vehicle, check again that the support arms are correctly positioned in relation to the specified pick-up points on the vehicle. Also check that all the locking levers make it impossible to turn the arms, i.e. that they are correctly engaged. Now the vehicle can be lifted to the desired height. For safe working, the platform should now be moved into the safety locks. This is done by pressing the "LOCK" button. ® Copyright ATH-Heinl GmbH & CO.KG, All rights reserved / Misprints and technical changes reserved / Release date: 2022-07 Product manufacturer ATH-Heinl GmbH & CO.KG - 25 -

. Park-Position • From a lifting height of 500 mm, a safety catch automatically engages. • By pressing the Park button, the lift lowers to the nearest detent. Make sure that the height is even. c. Lowering • Before lowering, check if there are any objects under the car. • Press the Lower button, if the lift does not lower and a lift truck is in the safety catch, first raise the lift approx. 2 seconds so that the catches unlock. • Press and hold the Lower button until the desired lifting height is reached. The lift stops automatically when the CE stop height is reached. To lower the lift completely, press the Lower button again. An acoustic signal sounds during lowering within the CE height. d. Finish • Lower the platform completely. • Turn down the pick-up plates and swing the support arms back to the 90° position. • Move the lift out from under the vehicle. ® Copyright ATH-Heinl GmbH & CO.KG, All rights reserved / Misprints and technical changes reserved / Release date: 2022-07 Product manufacturer ATH-Heinl GmbH & CO.KG - 26 -

ATH-Heinl GmbH & Co. KG Gewerbepark 9 92278 Illschwang Deutschland
Tel.: +49 (0) 9666 18801-00 Fax: +49 (0) 9666 18801-01 Web: www.ath-heinl.de Impressum: ATH-Heinl GmbH & Co. KG