Aufrufe
vor 8 Monaten

ATH-Heinl Bedienungsanleitung Single Lift 25M

  • Text
  • Lowering
  • Maintenance
  • Inspection
  • Lifting
  • Misprints
  • Copyright
  • Hydraulic
  • Manufacturer
  • Technical
  • Reserved
ATH-Heinl Bedienungsanleitung Single Lift 25M

Compressed air system

Compressed air system Minimum requirement: PROMAT chemicals special compressed air oil Item No.: 4000355209 Cleaning Minimum requirement: Caramba intensive brake cleaner acetone-free Care and protection of metals, painted or powder-coated surfaces Minimum requirement: Petec spray translucent - 500 ml Item No. 73550 Petec wall inlet translucent - 1000 ml Item No. 73510 Petec UBS pistol Item No. 98507 Care and protection of metals, painted or powder-coated surfaces in the tread area and plastic parts Minimum requirement: Valet Pro Classic Protectant Plastic Sealant 500 ml 4.2 Safety Regulations for Oil Always observe the legal requirements or regulations for handling used oil. Always dispose of used oil through a certified organisation. In the case of leaks, oil must be collected immediately with binders or trays so that it cannot penetrate into the soil. Avoid any skin contact with the oil. Do not allow oil vapours to escape into the atmosphere. Oil is a combustible medium. Pay attention to possible hazards. Wear oil-resistant protective clothing, such as gloves, goggles, protective clothing, etc. ® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-09 Manufacturer ATH-Heinl GmbH & CO.KG - 31 -

4.3 Notes Regardless of the level of dirt, the machine must be maintained, cleaned and serviced at regular intervals. The machine should then be treated with a care product (such as oil or wax spray). Do not use cleaning agents that are harmful to the skin. IF THE ABOVEMENTIONED POINTS ARE NOT FULFILLED, THE WARRANTY CLAIM IS EXCLUDED 4.4 Maintenance or Service Plan Interval Immediately Weekly Monthly Every 3 months Every 6 months Check of ALL safety-relevant parts Cleaning Check or restore surface protection Check for leaks in the hydraulic system Check or restore surface protection or corrosion protection Check or restore damage to the paint and components Check or restore rust damage Check or treat cavities and non-painted areas Check for leaks in the pneumatic system Control the tightness of screws Check, lubricate & adjust bearing slack Check wear parts Check fluids (level, wear, contamination, quality) Check and lubricate sliding surfaces Remove any dirt inside Clean and check electrical components Check motor and transmission for function and wear Check welds and construction Visual inspection (according to inspection plan) X X X X X X X X X X X X X X X X X X X ® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-09 Manufacturer ATH-Heinl GmbH & CO.KG - 32 -

Handbücher

ATH-Heinl GmbH & Co. KG Gewerbepark 9 92278 Illschwang Deutschland
Tel.: +49 (0) 9666 18801-00 Fax: +49 (0) 9666 18801-01 Web: www.ath-heinl.de Impressum: ATH-Heinl GmbH & Co. KG