ATH-Heinl Bedienungsanleitung Single Lift 12PL

ATH-Heinl Bedienungsanleitung Single Lift 12PL Das ATH-Heinl Handbuch für den ATH Single Lift 12PL ist eine umfassende Anleitung für die 1-Säulen-Hebebühne ATH Single Lift 12PL. Mit diesem Handbuch erhalten Sie detaillierte Informationen zur Installation, Bedienung und Wartung Ihrer Hebebühne. Es bietet wertvolle Hinweise und Tipps, um die Sicherheit und Leistungsfähigkeit Ihrer Hebebühne zu gewährleisten. Entdecken Sie die vielseitigen Anwendungsmöglichkeiten dieses hochwertigen Produkts und optimieren Sie Ihren Arbeitsablauf. The ATH-Heinl manual for the ATH Single Lift 12PL is a comprehensive guide for the 1-post lift ATH Single Lift 12PL. This manual provides detailed information on the installation, operation, and maintenance of your lift. It offers valuable insights and tips to ensure the safety and performance of your lift. Explore the versatile applications of this high-quality product and optimize your workflow with confidence.

2.7 Electrical

2.7 Electrical connection Attention The general and local regulations must be observed. Therefore, this step may only be carried out by a trained specialist. Pay attention to the necessary supply line. Voltage deviations should not exceed 0.9 - 1.1 times the nominal voltage range and frequency deviations should not exceed 0.99 - 1.01 times the frequency range. To be able to guarantee this, necessary protective measures must be taken. At the end of the work, the direction of rotation of the motor must be checked. 2.8 Pneumatic connection Attention For all pneumatic systems, a compressed air maintenance unit (sometimes included in the scope of delivery) must be installed between the supply line and the system. The air pressure of the supply line must at least correspond to the "Technical data". The correct setting of the compressed air maintenance unit must be checked. The compressed air maintenance unit must be serviced at regular intervals. The maximum or minimum pressure ensures proper function without possible damage. 2.9 Hydraulic connection Before the system is put into operation or operated with oil for the first time, the following must be observed with regard to optimum, trouble-free and virtually air-free operation: ■ ■ ■ ■ All hydraulic lines must be connected and tightened in accordance with the hydraulic diagram and, if applicable, the hose designation. All hydraulic lines and cylinders must be vented according to the hydraulic plan or hose designation. In order to ensure the proper and safe functioning of the system and the hose lines used, it is essential to ensure that the hydraulic fluids used comply with the specific specifications and recommendations of the manufacturer. Media used that do not meet the specific requirements or are contaminated without authorization will damage the entire hydraulic system, shorten the service life of the hydraulic systems used and lead to the exclusion of liability and warranty. Note It is also possible to contaminate the system by refilling it with oil 76 ® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved Release date: 10.07.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG

The minimum requirement and minimum oil quantity must be checked or produced. 2.10 Assembly Note These instructions are not to be regarded as assembly instructions; they only provide information and assistance for competent and skilled fitters. Warning Appropriate clothing and individual protective equipment must be worn for the following work. Caution Incorrect assembly and settings will result in exclusion of liability and warranty. Partially pre-assembled machines must be inspected, instructed and accepted by a competent person before commissioning. Assembly of machines must be carried out by a skilled and qualified person. 2.10.1 Foundation plan Attention Do not install the lift on asphalt or soft screed. There must be no expansion joints or cracks that would interrupt the continuity of the reinforcement. The load-bearing capacity of suspended ceilings must be checked by the operator. The function of the lifting platform may be impaired if it stands at an angle. Observe the specified concrete quality and hardening time Concrete quality C25/30 Hardening time of concrete Min. 20 days The foundation plan below shows the standard. For more specific cases, please contact our technical service. ® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved Release date: 10.07.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG 77