Aufrufe
vor 6 Monaten

ATH-Heinl Bedienungsanleitung Single Lift 12PL

  • Text
  • Vorbehalten
  • Reserved
  • Technical
  • Produit
  • Manufacturer
  • Technische
  • Maintenance
  • Fabricant
  • Techniques
  • Inspection
  • Bedienungsanleitung
  • Heinl.de
ATH-Heinl Bedienungsanleitung Single Lift 12PL

Maximum permitted

Maximum permitted humidity: ≤80% By 30 °C Low height above the sea level: ≤2000m Power connection and ground cable (see technical data) it could be in form of plug connector (socket and plug device) or fixed connection. Necessary supply lines See technical data 2.5 Fixing General and local regulations must be observed. Therefore, these steps should only be carried out by a trained professional. The machine must be set up and fixed on sufficiently firm ground, if necessary, according to the minimum requirements of the information given in the foundation plan. The machine must be fastened at the points provided with suitable or specified fastening material. In addition to the ground conditions, the guidelines and instructions of the accident prevention regulations as well as the workplace regulations must be observed when selecting an installation site. When assembling on floor coverings, check their load-bearing capacity. A construction expert should be consulted for inspection when mounting on floor coverings. 2.6 Electrical Connection General and local regulations must be observed. Therefore, these steps may only be carried out by a trained professional. Pay attention to the necessary supply line (see technical data). The connection should be made with a 230V Schuko plug or 5-phase 16 A CEE plug (partially included). Voltage deviations should be 0.9 - 1.1 times the nominal voltage range and the frequency deviation should be 0.99 - 1.01 times the frequency range. Necessary protective measures must be taken to guarantee this. At the end of the work, the direction that the motor rotates must be checked. 2.7 Pneumatic Connection For all pneumatic systems, a compressed air maintenance unit (partially included) must be installed between the supply line and the system. The air pressure of the supply line must at least correspond to the technical data. The compressed air maintenance unit must be set correctly and checked. The compressed air maintenance unit must be serviced at regular intervals. The maximum or minimum pressure ensures perfect functioning without any damage. ® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2022-02 Manufacturer ATH-Heinl GmbH & CO.KG - 15 -

2.8 Hydraulic Connection Before the system is put into operation or operated for the first time with oil, the following must be observed with regard to the optimal, trouble-free and almost air-free functioning All hydraulic lines must be connected and tightened according to the hydraulic plan and, if applicable according to the hose designation. All hydraulic lines and cylinders must be vented according to the hydraulic plan and, if applicable, according to the hose designation. In order to ensure the faultless and safe functioning of the system and the hose assemblies used, the hydraulic fluids used must comply with the specific instructions and recommendations of the manufacturer. Used media that do not meet the specific requirements or which have unauthorised contamination damage the entire hydraulic system and shorten the service life of the hydraulic systems used. Warning: (system contamination can also occur when oil is refilled) The minimum requirement and minimum oil quantity must be checked and ensured. 2.9 Assembly These instructions are not to be viewed as assembly instructions; hints and tips are provided only for trained expert installers. Suitable clothing and personal protection must be worn for the following work. Incorrect installation and settings lead to exclusion of liability and warranty. Partly pre-assembled machines must be checked, introduced and approved by a competent person before commissioning. Machine assembly must be carried out by a qualified and competent person. ® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2022-02 Manufacturer ATH-Heinl GmbH & CO.KG - 16 -

Handbücher

ATH-Heinl GmbH & Co. KG Gewerbepark 9 92278 Illschwang Deutschland
Tel.: +49 (0) 9666 18801-00 Fax: +49 (0) 9666 18801-01 Web: www.ath-heinl.de Impressum: ATH-Heinl GmbH & Co. KG