Aufrufe
vor 7 Monaten

ATH-Heinl Bedienungsanleitung Single Lift 12PL

  • Text
  • Vorbehalten
  • Reserved
  • Technical
  • Produit
  • Manufacturer
  • Technische
  • Maintenance
  • Fabricant
  • Techniques
  • Inspection
  • Bedienungsanleitung
  • Heinl.de
ATH-Heinl Bedienungsanleitung Single Lift 12PL

Operation Warning

Operation Warning symbols 1. Check the correct load capacity and load distribution of vehicles. 2. Do not override the self-closing lifts control 3. Keep feet clear of lift while lowering. 4. Keep free the area by lifting or lowering of the vehicles. 5. Clear area if vehicle is in danger of falling. 6. Avoid excessive raking of the vehicle while on the lift. 7. The lift have to be used by trained operator only. 8. Use vehicle manufacturer’s lifting points and close the doors before lifting of the vehicle 9. Allow no unauthorized persons in the working area. 10. Use height extenders when necessary to ensure a good contact. 11. Always use safety stands when removing or installing heavy components. 12. Auxiliary adapters may reduce load capacity. 13. Proper maintenance and inspection is necessary for safe operation. 14. Read operating and safety manuals before using the lift 15. Do no operate with a damaged lift 16. On the lift, lifting arms inside of the lifted vehicles any objects or people have not to be carried. 17. Before lowering the lift check that there are not obstructions under the vehicle or the lifting arms. 18. Lift must not be cleaned under running water This product is designed for lifting vehicles. The relevant technical specifications of the lift have to be considered. ® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2022-02 Manufacturer ATH-Heinl GmbH & CO.KG - 7 -

1. Preparation a. READ AND UNDERSTAND all safety warning procedures before operating lift. b. Lower the lift completely c. Place the platforms suitably for the track widgth of the vehicle d. If needed (for example for mowers) placing the fork-adaptors suitably to the smaller track widght e. Drive the vehicle on the platforms, paying attention by the load distribution. f. To ensure that the vehicle cant move while working on it, make addionale fixations with securing straps between the platform and the vehicle wheels. 2. Lifting the vehicle a. Switch on the main switch of the lift b. Raise the vehicle by pressing of the push button „UP“ until the vehicle is lifts of on a height of 100-150mm. c. Recheck to make sure the vehicle is secure. d. Always ensure safeties are engaged before any attempt is made to work on or near vehicle. 3. Parking the vehicle a. Up to a lifting height of 500mm automatically intervenes the safety notches. b. Pressing the push button „LOCK UP“ for few seconds, lowers the carriages in the nearest safety notches. Pay attention to the height level. 4. Lowering the vehicle a. Before lowering the lift check that there are not obstructions under the vehicle or the platforms. b. Press the push button „UP“ for two seconds, frees the safety notches for the following lowering process. Press and keep the push button „ LOWERING“ pressed, unlocks the safety notches and lowers. 5. Driving Out a. Lower the lift completely. b. Drive the vehicle out of the lift. ® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2022-02 Manufacturer ATH-Heinl GmbH & CO.KG - 8 -

Handbücher

ATH-Heinl GmbH & Co. KG Gewerbepark 9 92278 Illschwang Deutschland
Tel.: +49 (0) 9666 18801-00 Fax: +49 (0) 9666 18801-01 Web: www.ath-heinl.de Impressum: ATH-Heinl GmbH & Co. KG