2.0 INSTALLATION The machine must be installed by an authorised person according to the instructions. The operating instructions (including the log) are an important part of the machine / product. !!!PLEASE STORE CAREFULLY!!! The product must be checked after completion of the installation, handover, if necessary briefing and then regularly in accordance with the applicable regulations and legal provisions in the country of operation by a suitable and approved company or facility. 2.1 Transport & Storage Conditions When transporting and positioning the machine, always use suitable lifting and material handling equipment and consider the machine’s centre of gravity. The machine should only be transported with the original packaging. Data: Width 1150 mm Length 950 mm Height 990 mm Storage temperature -25 bis +55 °C 2.2 Unpacking the machine Remove the top cover of the packaging and make sure that no damage has occurred during transport. Remove the safety bolt to remove the machine from the pallet / rack. Use a suitable lifting device (possibly with a stopping rope) to lower the machine from the pallet / frame. The packaging material used for the machine should be stored carefully. Keep the packaging material out of the reach of children as it may be hazardous. ® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-10 Manufacturer ATH-Heinl GmbH & CO.KG - 17 -
2.3 Delivery Contents 1 Steel assembly head 2 Plastic contact strip 3 Tyre assembly iron 4 Impact anchor 5 Seal kit and membrane for rapid air vent 6 Plastic protection for clamping jaws 7 Manual tyre inflator 8 Compressed air maintenance unit 2.4 Location The machine should be kept away from flammable and explosive materials, as well as from sunlight and intense light. The machine should be placed in a well-ventilated location. The machine must be set up on sufficiently firm ground, if necessary, according to the minimum requirements of the information given in the foundation plan. In addition to the ground conditions, the guidelines and instructions of the accident prevention regulations as well as the workplace regulations must be observed when selecting an installation site. When assembling on floor coverings, check their load-bearing capacity. A construction expert should be consulted for inspection when mounting on floor coverings. The machine should only be mounted and used within closed rooms. It has no corresponding safety features (e.g. IP protection, galvanised design, etc.). Temperature 4-40 °C Sea level < 1500 m Humidity 50% at 40 °C – 90% at 20 °C ® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-10 Manufacturer ATH-Heinl GmbH & CO.KG - 18 -
Deutsch English Polskie Français
Inhalt 1.0 EINLEITUNG .............
1.2 Beschreibung 1 Handgriff mit Lu
1.3 Bedienung 1.3.1 Feststellen von
1.3.3 Aufspannen der Räder Vorbere
1.3.5 Demontieren eines Reifens Bei
Überprüfen Sie, ob sich der Monta
Laden...
Laden...
Laden...
LinkedIn
Facebook
Instagram
Youtube
Email
Twitter
Pinterest